NF FRA51602, Инструкция по эксплуатации

Страница: 78 / 286

3.5 Operation screen reference
3
-
40
FRA 51602
3.5.1 OSC dialog
■ [FREQUENCY]
: Set the frequency
This is the frequency of the signal that is output from the OSC connector. The frequency at which a spot
measurement is performed (measurement at a fixed frequency) is set. After a sweep measurement,
however, the value is replaced by the last measured frequency. If the sweep is interrupted, the frequency
at the time of interruption is set.
○ Setting method
< Numerical value settings (immediate setting) > , < Numerical value settings (new input) > ,
< Numerical value settings (edit) >
○ Function key functions
・
[SWEEP MIN
– > FREQ]
: Copy the sweep lower frequency limit to
FREQUENCY
.
・
[SWEEP MAX
– > FREQ]
: Copy the sweep upper frequency limit to
FREQUENCY
.
・
[MKR
– > FREQ]
: Copy the main marker frequency to
FREQUENCY
.
・
[
⊿
MKR
– > FREQ]
: Copy the delta marker frequency to
FREQUENCY
.
・
[DIRECT NEW]
: Set the frequency with the numerical input dialog
【
NUM
】
.
・
[DIRECT EDIT]
: Edit the frequency setting with the numerical input dialog
【
NUM
】
.
○ Functions of the function keys set with the numerical input dialog
【
NUM
】
・
[uHz]
: Set with the entered value in units of µHz.
・
[mHz]
: Set with the entered value in units of mHz.
・
[Hz]
: Set with the entered value in units of Hz.
・
[kHz]
: Set with the entered value in units of kHz.
・
[MHz]
: Set with the entered value in units of MHz.
The setting range is 10 µHz to 2 MHz; The setting resolution is 10 µHz.