NF FRA51602, Инструкция по эксплуатации

Страница: 221 / 286

6.3 Measurement conditions file format
6
-
7
FRA 51602
16 AmplitudeCompressionRefCh, {1|2} Sets the amplitude compression function
reference channel
17 AmplitudeCompressionRefLevel,
(NR3)
Sets the amplitude compression function
target level (Vrms)
18 AmplitudeCompressionOutputLimit,
(NR3)
Sets the amplitude compression function
output limit (Vrms)
19 AmplitudeCompressionTolerance,
(NR1)
Sets the amplitude compression function
permissible error (%)
20 AmplitudeCompressionRetry, (NR1) Sets the amplitude compression function
maximum number of retries
21 AmplitudeCompressionCorrectionFactor,
(NR1)
Sets the amplitude compression function
correction factor (%)
22 MeasIntegrationMode,
{FIX|SHORT|MED|LONG}
Sets the integration mode
23 MeasIntegrationType, {CYCLE|SEC} Sets the integration unit to
cycles (CYCLE) or time (SEC)
24 MeasIntegrationCYCLE, (NR1) Sets the integration period (cycles)
25 MeasIntegrationSEC, (NR3) Sets the integration time (seconds)
26 MeasStartDelayType, {CYCLE|SEC} Sets the measurement start delay unit
Period (CYCLE) or time (SEC)
27 MeasStartDelayCYCLE, (NR1) Sets the measurement start delay.
(cycles)
28 MeasStartDelaySEC, (NR3) Sets the measurement start delay time
(seconds)
29 MeasDelayType, {CYCLE|SEC} Sets the measurement delay unit
Period (CYCLE) or time (SEC)
30 MeasDelayCYCLE, (NR1) Sets the measurement delay period
(cycles)
31 MeasDelaySEC, (NR3) Sets the measurement delay time
(seconds)
32 MeasSlopeCompensation, {ON|OFF} Sets the slope compensation function to
enabled (ON) or disabled (OFF)
33 MeasCalculus, {-2|-1|0|1|2} Sets the measurement differentiation and
integration calculations
-2: double integral
-1: integral; 0: OFF
1: differential
2: second-order differential
34 SweepLowerFrequency, (NR2) The sweep frequency lower limit (Hz)
35 SweepUpperFrequency, (NR2) The sweep frequency upper limit (Hz)
36 SweepResType, {LOG|LIN} The sweep type
37 SweepRes, (NR1) The sweep resolution
38 SweepRepeat, {ON|OFF} Sets the repeat measurement to
enabled (ON) or disabled (OFF).
39 SweepFreqChangeMode, The frequency change mode