Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 216 / 230

215
4. TROUBLE INDICATION
4.1 Error code
1
2
3
4
5
6
7
8
9
10
0x01808301
An error occurred when
receiving data.
• FR-A800-E/F800-E
The function to communicate with
FR Configurator2 is not set in
Pr.1427 to Pr.1429 Ethernet
function selection
.
• FR-A800-E-R2R
The function to communicate with
FR Configurator2 is not set in
Pr.1076 to Pr.1078 Ethernet
function selection
.
• FR-E800-E
The function to communicate with
FR Configurator2 is not set in
Pr.1427 to Pr.1430 Ethernet
function selection
.
• FR-E700-NE
The function to communicate with
FR Configurator2 is not set in
Pr.833 to Pr.835 Ethernet
function selection
.
"Ethernet" is selected from the "PC-side
port" drop-down list and "Not used" from the
"Through" drop-down list.
• FR-A800-E/F800-E
Set the combination of "5001" (or
"5002") and "45237" in any two
parameters from
Pr.1427 to
Pr.1429 .
• FR-A800-E-R2R
Set the combination of "5001" (or
"5002") and "45237" in any two
parameters from
Pr.1076 to
Pr.1078 .
• FR-E800-E
Set the combination of "5001" (or
"5002") and "45237" in any two of
Pr.1427 to Pr.1430 .
• FR-E700-NE
Set the combination of "31" (or "32")
and "20" in any two parameters from
Pr.833 to Pr.835 .
"GOT" is selected from the "Through" drop-
down list and the GOT and the inverter are
connected via Ethernet.
• FR-A800-E/F800-E
Set "5001", "5000", "5006", or
"5008" in any parameter from
Pr.1427 to Pr.1429 .
• FR-A800-E-R2R
Set "5001", "5000", "5006", or
"5008" in any parameter from
Pr.1076 to Pr.1078 .
• FR-E800-E
Set "5001", "5000", "5006", or
"5008" in any parameter from
Pr.1427 to Pr.1430 .
• FR-E700-NE
Set "31", "30", "36", or "38" in any
parameter from
Pr.833 to Pr.835 .
"Programmable controller" or "GOT to
programmable controller" is selected from
the "Through" drop-down list.
• FR-A800-E/F800-E
Set "5001" in any parameter from
Pr.1427 to Pr.1429 .
• FR-A800-E-R2R
Set "5001" in any parameter from
Pr.1076 to Pr.1078 .
• FR-E800-E
Set "5001" in any of Pr.1427 to
Pr.1430 .
• FR-E700-NE
Set "31" in any parameter from
Pr.833 to Pr.835 .
0x01808401
The communication line cannot
be opened.
Control error.
Check the communication
environment.
0x01808402 Signal cable control error.
0x01808403 Incorrect signal cable setting.
0x0180840F
Failed to obtain the signal cable
status information.
0x01808410 CD signal cable offline.
0x01808405
Communication parameter setting
error.
Check the communication settings.
0x01808406 Incorrect baud rate setting.
0x01808407 Incorrect data length setting.
0x01808408 Incorrect parity setting.
0x01808409 Incorrect stop bit setting.
0x0180840A Communication setting error.
Error code (HEX) Error message Possible cause Countermeasure