Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 76 / 230

75
2. PROJECT CREATION
2.1 Project file operation
1
2
3
4
5
6
7
8
9
10
*1 When the programmable controller is protected by a remote password, automatic recognition is disabled.
• The following shows automatic recognition condition.
( ○ : Enabled, ×: Disabled)
• If the network device is protected by a remote password, the "Remote password input" dialog appears during the automatic
recognition.
2.1.3 Connection setting
In the "Connection setting" of the "System setting" window, set the communication between the personal computer and
inverter, etc.
For communication with the inverter using the USB port of personal computer, set "USB" in the box of "PC-side port".
For communication with the inverter using the serial port of personal computer, set "Specify the COM port number" in the box
of "PC-side port".
For communication with the inverter using the LAN port of personal computer, set "Ethernet" in the box of "PC-side port".
NOTE
• To use the USB/RS-485 conversion cable DINV-U4, select [COM*: DTC DINV-U4 USB Serial Port (COM*)] for the PC-side
port.
• If it is not in the drop-down list although the DINV-U4 cable is connected, do the following:
Check the DINV-U4 cable for insecure connection to the personal computer.
Check if the DINV-U4 driver is already installed in the personal computer.
FR-E700-NE
Not connected
833 Ethernet function selection 1
Set a combination of "31" (or "32") and "20" in
any two of the parameters.
834 Ethernet function selection 2
835 Ethernet function selection 3
837 to 843 Ethernet IP filter address
Set the IP address to within the IP address
range of the personal computer.
Programmable
controller
833 Ethernet function selection 1
Set "31" in any of the parameters. 834 Ethernet function selection 2
835 Ethernet function selection 3
837 to 843 Ethernet IP filter address
Set the IP address to within the IP address
range of the Ethernet module.
GOT to
programmable
controller
*1
833 Ethernet function selection 1
Set "31" in any of the parameters. 834 Ethernet function selection 2
835 Ethernet function selection 3
837 to 843 Ethernet IP filter address
Set the IP address to within the IP address
range of the Ethernet module.
PC-side port Intermediate device
Automatic recognition
Direct
connection
Hub connection Router connection
Ethernet Not connected ○ ○ ○
USB GOT × × ×
Ethernet GOT ○ ○ ○
USB GOT to
programmable
controller
○ ○ ○
USB, RS-232C,
Ethernet Programmable
controller
○ ○ ○
Model Through Pr. Name Setting