Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 227 / 230

226
4. TROUBLE INDICATION
4.1 Error code
*1 The value displayed in ** position depends on the applicable error.
0xA001**16
*1
Safety parameter settings are corrupt.
• Retry the operation interrupted by the fault.
• Perform safety parameter clear.
If the problem still persists after taking the above measure, contact
your sales representative.
0xA002**16
*1
0xA001**17
*1
0xA002**17
*1
0xA001**18
*1
A safety parameter clearing error
occurred.
0xA002**18
*1
0xA001**20
*1
The password protection is still active.
• Enter the correct password.
• If you forget the password, perform safety parameter clear to
reset the password to the initial value, then enter the password
again.
If the problem still persists after taking the above measure, contact
your sales representative.
0xA002**20
*1
0xA001**21
*1
A password writing error occurred.
• Retry the operation interrupted by the fault.
• Perform safety parameter clear.
If the problem still persists after taking the above measure, contact
your sales representative.
0xA002**21
*1
0xA00E**04
*1
A communication error occurred. Check the noise and wiring.
0xA00F**04
*1
Error code (HEX) Error message Countermeasure