Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 136 / 230

135
3. FUNCTION
3.4 Graph
1
2
3
4
5
6
7
8
9
10
3.4.1 Graph window
NOTE
• If a normal communication with inverter is not maintained (communication error, etc.), the sampling stops.
• If a fault occurs during sampling, sampling continues.
• During sampling, other communication tasks such as parameter reading are unavailable.
• When parameter write is performed during measurement of graph, waveform data may be incorrect.
• When the negative output of monitor item is enabled/disabled during measurement of graph, the waveform data will be
incorrect.
3.4.2 Graph window toolbar
Symbol Name Function/description
A Tool bar Allows operation of the file, history control, and graph display settings.
B Properties
Setting of the measurement conditions, display conditions, and cursor can be done in the
properties.
C Sampling item column
Displays the contents of the analog CH and digital CH set by [Waveform] in the settings tab of the
condition properties.
D
Measurement start/stop
button
Start
Starts sampling.
Stop
Stops sampling. This button only appears when operating.
E Graph display area Displays the sampled data in a graph.
F Horizontal axis scroll bar Allows scrolling of the displayed section in the graph display area.
G Trigger position
Shows the position in which the trigger completes. "T" on the graph horizontal axis denotes
measuring time period.
D
B
E
F
A
G
C
A
O
B C E D F G H I
J K L M N