Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 99 / 230

98
3. FUNCTION
3
FUNCTION
This chapter explains the functions of this product.
Always read the instructions before using the equipment.
 Connecting the USB power supply / 24 V external power supply
 Applicable models
• FR-E800 series
 Functions available during USB power delivery / 24 V external power supply operation
• Only the following functions operate normally when power is supplied to the FR-E800 inverter from the USB port or a 24
V external power supply.
○ : Available ×: Not available
 Precautions
• Option information cannot be recognized automatically by automatic recognition in the system setting window.
• The AI fault diagnosis and main circuit capacitor life diagnosis are not available.
• Serial numbers cannot be displayed using the serial number function.
• Diagnosis result output is not available for the I/O monitor function, faults history function, serial number function, and life
check function.
• The inverter is reset when power source is changed from the main circuit power supply to the USB power supply, or from
the USB power supply or the 24 V external power supply to the main circuit power supply. A timeout error may occur
depending on the types of functions being activated.
 Precautions only for USB power delivery
• Ethernet communication is not guaranteed.
• Note that Ethernet communication may be disabled in the FR-E800-(SC)E inverter when turning ON/OFF the main circuit
power supply is repeated while Ethernet and USB connections are used at the same time. Disconnect the USB cable
before turning ON/OFF the main circuit power supply.
Function
USB power
delivery
24 V external power
supply operation
Parameter list function
Parameter list ○ ○
Settings by function
Motor setting ○ ○
Analog input terminal
calibration ○ ○
Output terminal
calibration ○ ○
Trace setting ○ ○
Input terminal
assignment ○ ○
Output terminal
assignment ○ ○
Point table ○ ○
Unit selection ○ ○
Safety parameter setting ○ ○
Convert ○ ○
Batch monitor function ○ ○
I/O terminal monitor × ○
Diagnostic function
Fault history function × ○
Serial number function ○ ○
Life check ○ ○
Online status display ○ ○
PLC function ○ ○
USB memory parameter copy file edit ○ ○
Ethernet parameter setting function ○ ○
Help ○ ○