Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 119 / 230

118
3. FUNCTION
3.2 Safety parameter setting
3.2.5 Safety parameter verification
This function accesses the inverter safety parameters, and verifies the safety parameter setting values set by FR Configurator2
with the values selected in the verify destination window.
The "Select destination selection" window can be displayed by selecting [Verify...] from the [Safety parameter setting (Z)] menu
bar, or by selecting [Verify] on the toolbar.
The Verify window appears after selecting the destination on the Verify destination window.
3.2.6 Configuration signature
The safety parameter setting function is available for the following models.
Model: CIP Safety model
The Safety Configuration ID (SCID) read from the inverter is displayed.
Symbol Name Function/description
A Destination
Initial value Verifies against the initial value.
Inverter Verifies against parameter setting values written to the inverter.
File Verifies against parameter list setting values saved to a file (*.spr4).
B OK Shows the Verify window.
C Cancel Closes the Verify destination selection window without performing verification.
A
B C
B
A
Symbol Name Function/description
A
St. No. (Station
number)
Shows the verified station number.
B Verify list Shows parameters whose verified values are mismatched.