Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 148 / 230

147
3. FUNCTION
3.4 Graph
1
2
3
4
5
6
7
8
9
10
 Measurement with a trigger
 Trigger data: Fault
1.
Specify the station number to be measured as the "Tgt. St." (Target station). Next, select "Output frequency" for the
"Analog 1" column of "Wave", "RUN" for "Digital 1", and "FU" for "Digital 2".
2.
Trigger setting:
Select "Fault" for the "Trigger data" column.
Select "90"% for the "Trigger position" column.
3.
Measurement will start by clicking [ Start].
4.
Operation starts automatically if an inverter alarm occurs.
5.
Measurement is finished by clicking [ Stop], or when the set sampling time is elapsed.
6.
The graph display can be adjusted.
Select "RUN".
Select "Output frequency".
Select "FU".
Select the station to be measured.
Select "Fault".
Select "90".
Select " Start".
Select " Stop".
Changes the displayed
position of the vertical
axis scale.
Moves up/down the
digital waveform.
Move up/down the waveform.