Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 147 / 230

146
3. FUNCTION
3.4 Graph
2.
Trigger setting:
Select "Digital CH1" for the "Trigger data" column.
Select "Rise" for the "Trigger type" column.
Select "90"% for the "Trigger position" column.
3.
Measurement will start by clicking [ Start].
4.
Measurement automatically starts if the trigger conditions are met (rise of the terminal RUN signal).
5.
Measurement is finished by clicking [ Stop], or when the set sampling time is elapsed.
6.
The graph display can be adjusted.
7.
Data can be saved to a file by "Save as" (refer to page 93 ).
NOTE
• In this example, "Trigger position" is set to "90%". After clicking [ Start], the rise of the terminal RUN signal will be ignored
and measurement will not start until 90% of the sampling time elapses.
Select "Digital CH 1".
Select "Rise".
Select "90".
Select " Start".
Select " Stop".
Changes the displayed
position of the vertical
axis scale.
Moves up/down the
digital waveform.
Move up/down the waveform.