Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 146 / 230

145
3. FUNCTION
3.4 Graph
1
2
3
4
5
6
7
8
9
10
2.
The sampling interval can be set for "measurement interval", and the sampling time can be set for "Time".
3.
Measurement will start by clicking [ Start].
4.
Measurement is finished by clicking [ Stop], or when the set sampling time is elapsed.
5.
The graph display can be adjusted.
6.
Data can be saved to a file by "Save as" (refer to page 93 ).
 Measurement with a trigger
 Trigger data: Digital CH1
1.
Specify the station number to be measured as the "Tgt. St." (Target station). Next, select "Output frequency" for the
"Analog 1" column of "Wave", "RUN" for "Digital 1", and "FU" for "Digital 2".
Set the sampling time.
Set the sampling interval.
Select " Start".
Select " Stop".
Changes the displayed
position of the vertical
axis scale.
Moves up/down the
digital waveform.
Move up/down the waveform.
Select "RUN".
Select "Output frequency".
Select "FU".
Select the station to be measured.