Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 33 / 230

32
1. OUTLINE
1.4 Connection and parameter setting
 FR-E700 and FR-E700EX
• Applicable cable
 Related parameters for USB connection
Set the following communication parameter when connecting the USB connector of the inverter. To set parameters or input
operation commands, set the following parameters and switch the operation mode to PU operation mode.
NOTE
• Set a station number of each inverter in Pr.547 USB communication station number . Perform inverter reset after setting the
parameter.
Interface Conforms to USB 1.1
Transmission speed 12 Mbps
Wiring length Maximum 5 m
Connector
800 series, FR-E700, and FR-E700EX USB mini B connector (receptacle)
FR-A700, FR-B (700), and FR-B3 (700) USB B connector (B receptacle)
Recommended USB cable MR-J3USBCBL3M (cable length 3 m)
Inverter
Parameter setting
Operation
mode
Communication parameter Command source parameter
FR-A800(-E)
FR-B
FR-B3
FR-B4
FR-F800(-E)
FR-E800(-E/-SCE)
Pr.548 USB communication check time
interval
= "9999" (initial value)
Pr.551 PU mode operation
command source selection
= "3 or
9999" (initial value: "9999")
PU
FR-A700
FR-E700(SC)(NC)
FR-E700EX
Pr.548 USB communication check time
interval
≠ "0" (initial value: "9999")
Pr.551 PU mode operation
command source selection
= "3 or
9999" (initial value: "9999")
FR-B (700)
FR-B3 (700)
Pr.551 PU mode operation
command source selection
= "3"
(initial value: "2")
USB cable
USB connector
How to open the USB connector cover
Pull the cover in the direction of arrow. Then turn it upward.