MIMAKI TextileJet Tx2-1600 Series, Руководство по эксплуатации

Страница: 93 / 154

- 3.5 -
ADJUSTING THE LAPEL BAR
Diverse types of media are used for inkjet printers: different raw materials including natural materi-
als, synthesized materials, etc. and materials with different manufacturing processes including textile
fabric, knit fabric, etc. In addition, even for the same medium, the elasticity characteristic changes
according to the difference in pre-treatment, etc. To perform printing on diverse types of media with
appropriate tension which best suits each medium, it is necessary to adjust the mount position of the
lapel bar and the number of bars mounted.
CHANGING THE WINDING ANGLE OF THE LAPEL BAR >
High-tension media setting Low-tension media setting
CHANGING THE WINDING ANGLE OF THE LAPEL BAR >
Media set 1 Media set 2
Larger contact angle
increases the tension.
Smaller contact angle
decreases the tension.
Effective to increase
the contact angle.
[1]Set a lapel bar.
[2]Set the medium.
[3]Set two lapel bars. [1]Set two lapel bars.
[2]Set the medium.
[3]Set a lapel bar.
[1]
[1]
[1]
[2]
[2]
[3]
[3]
[3]