MIMAKI TextileJet Tx2-1600 Series, Руководство по эксплуатации

Страница: 100 / 154

- 3.12 -
SETTING the ink drying time [DRYING TIME]
This function sets an ink drying time.
The drying time is the wait time by scanning and the time interval between the instant at which the
printing operation is completed.
Specify the time to be established in accordance with the printing resolituion on a drawing and the
type of fabric to be used.
STEP
1. Select a type.
(see page 3.4). Here, select [Type.1].
2. Push the [ENTER] key.
3. Set a drying time [DRYING TIME] by pushing
the JOG keys [ ] and [ ].
4. Push the [ENTER] key.
5. Set a drying time after the scanning by push-
ing the JOG keys [ ] and [ ].
This is the drying time from the instant at which the carriage
returns to the capping station till the instant at which the
carriage starts moving again for printing. The drying time that
can be set is 0.0 second to 9.9 seconds.
Here, select 1.0.
6. Push the [ENTER] key.
7. Push the [END] key twice, and the menu re-
turns to the LOCAL mode.
•
If the cloth is dried with the maximum value setting of DRYING TIME of 9.9
seconds, the use of the optional drying device is recommended.
For the drying device, contact the delivery agent or Mimaki sale office
nearby.
SET UP
SELECT
: TYPE.1
TYPE.1
MEDIA COMP.
< ent >
TYPE.1
DRYING TIME
< ent >
TYPE.1
EACH LINE
: 0.0S
TYPE.1
EACH LINE
: 1.0S
TYPE.1
DRYING TIME
< ent >
<< LOCAL >>
width : 1272mm