MIMAKI TextileJet Tx2-1600 Series, Руководство по эксплуатации

Страница: 25 / 154

- 1.5 -
CONFIGURATION AND FUNCTION
Front face
Name Function
1. Front cover It is opened when setting fabric or taking a corrective measure against a
fabric jam.
2. Parallel connector Bi-directional parallel interface connector (complies with IEEE1284)
3. IEEE1394 connector 400Mbps interface connector compatible with IEEE1394.
4. AC inlet The power cable is connected to the AC inlet.
5. Power switch It turns on/off the power to the plotter.
6. Operation panel This panel has the operation keys required for operating the plotter and
the LCD for displaying set items, etc.
7. Maintenance cover This is the station cover. During maintenance of the station (See page
4.8), open it by loosening the screws.
8. Waste ink hose Waste ink hose
9. Stand It supports the main unit. It is provided with casters that are used to
move the plotter.
10. Meda cover This cover prevents loose fabric from being caught by the take-up
device.
11. Take-up device It supports to wind up the roll fabric printed, and have the operation
named FORWARD / OFF / REVERSE.
12. Clamp lever It is made to go up-down the pinch roller for holding fabric.
13. Platen It puts out the fabric as it is plotted on.
14. Take-up auxiliary bar This shaft guides the plotted fabric to the take-up plotter.
1
2
3
4
6
5
7
8
9
10
14
13
12
11