MIMAKI TextileJet Tx2-1600 Series, Руководство по эксплуатации

Страница: 31 / 154

- 1.11 -
Fablic retainer
If the edge of the fabric is curled or it is raised, it may be caught by the head or inferior ink dis-
charge may occur.
To avoid this trouble, use the fabric pressers.
• The fablic retainer also act as a detection board which detects the printing
width.
Printing with the full width (up to 1620mm width) is possible by setting the
fablic ratainer to a position apart from the edge. (1620mm width or less )
• If a fablic retainer is stained by ink, it can be removed for washing. Remove
it from the end of notch in both side.
• When using fabric pressers, be sure to adjust the head height to 3mm or
more.
Using them with a low head height may cause failure.
Fabric retainer
Detection line of Fabric width
1
2
3