MIMAKI TextileJet Tx2-1600 Series, Руководство по эксплуатации

Страница: 9 / 154

- v -
NEVER DO THE FOLLOWING
WARNING
During assembly
• The pack of the device is as heavy
as approximately 250 kg.
Perform the assembly work by at
least four persons.
Do not disassemble or remodel the device.
• Never disassemble or remodel the
main unit of the printer and the ink
cartridge. Disassembling/remodeling
any of them will result in electric
shocks or breakdown of the device.
Do not use the device in damp places.
• Avoid damp environments when
putting the device into service. Do
not splash water onto the device.
High-humidity or water will give rise
to fire, electric shocks or breakdown
of the device.
Abnormal event occurs.
• If the device is used under an
abnormal condition where the device
produces smoke or unpleasant
smell, fire or electric shocks can
result. Be sure to turn off the power
switch immediately and detach the
plug from the receptacle. Check
first to be sure that the device no
longer produces smoke, and contact
a distributor in your district for
repair.
Never repair your device by yourself
since it is very dangerous for you to
do so.
Roll fabric
• Roll fabric is heavy. Be careful not
to drop it. If you drop it on your
foot, or any other part of your body,
personal injury can result.
Power supply and voltage
• Be sure to use the device with
thepower supply specifications
indicated.
• Be sure to connect the plug of
the power cable to a grounded
receptacle.
If not, fire or electric shocks can
result.
Handling of the power cable
• Take care not to damage, break
or work on the power cable.
If a heavy matter is placed on
the power cable, heated or
drawn, the power cable can
break to cause fire or electric
shocks.
Handling of ink cartridges
• Store ink cartridges and waste
ink tank in a place that is out of
the reach of children.
• If ink settles on the skin or
fabrics, immediately wash it off
with detergent or water.
In the event that ink gets in
eyes, immediately rinse it off
with water and consult a
medical doctor.
• Neither pound the ink cartridge
nor shake it violently so as to
prevent leakage of ink.
• Never refill the ink cartridge
with ink.
• MIMAKI assumes no
responsibility for malfunction
caused by using the device
after replenishment of ink.