![background image](http://html1.mh-extra.com/html/mimaki/textilejet-tx2-1600-series/textilejet-tx2-1600-series_operation-manual_1800200055.webp)
- 1.35 -
FABRIC THAT CAN BE USED
This section describes the types of fabric that can be used with the device and the method of setting
the media used.
Types of fablic that can be used
The types of fabric that can be used with this plotter “Roll” and “Leaf” fabric are cut sheet media.
However, because leaf fabric is handled in the same manner as roll fabric, be careful about the
setting position of leaf fabric.
•
When using the Leaf, the following functions are disabled.
[CENTERING]
[TAKE-UP]
[DRYING DEV.] (DRYING DEVICE is an option.)
Sizes of fabric that can be used
Maximum
1650 mm
Minimum
200 mm
printing width
1620 mm
Thickness
7.0 mmmm or less
Roll outside diameter
Ø
180 mm or less
Roll weight
15 Kg or less
Roll inside diameter
3, 2, and 1.35 inches
Printing surface
Faces OUT
Roll end treatment
Light-adhesive tape is used to allow the paper to be
removed from the core with ease.
fabric
Содержание TextileJet Tx2-1600 Series
