- 5.9 -
The wiping device is defective.
The device has failed to detect
the fabric.
The device has failed to detect
the origin.
The take-up device is not con-
nected.
The centering device is not
connected.
n=1: Centering sensor
n=2: Centering device
The drying device is defective.
Error message
Cause
Corrective measure
Turn off the power to the device
and turn it on after a while. If the
same error message appears again
on the LCD, contact your local
distributor to call for service.
Both edges of the set cloth are not
positioned properly.
If an error is displayed after setting
it properly, contact your dealer or
MIMAKI sales office.
Turn off the power to the device
and turn it on after a while. If the
same error message appears again
on the LCD, contact your local
distributor to call for service.
Check the connection.
Check the connection.
Check the connection.
Turn off the power of the drying
device, wait for a while, then turn it
back on. (The drying device is an
option.)
ERROR 46
WIPER
ERROR 50
MEDIA SENSE
ERROR 51
Y ORIGIN
ERROR 60
TAKE-UP UNIT
ERROR 62
CENTERING UNIT n
ERROR 63
DRYING DEVICE
Содержание TextileJet Tx2-1600 Series
