MIMAKI TextileJet Tx2-1600 Series, Руководство по эксплуатации

Страница: 112 / 154

- 3.24 -
Selecting take-up method [TAKE-UP]
Select the take-up method: the slack method or tension method.
INTERVAL : Takes up the cloth with the slack method using the slack
sensor. This prevents wrinkle at the platen, providing
stable printing. With this method, however, the take-up
condition may be disturbed easily. A difference between
left and right take-up thicknesses may make the roll cloth
whistle-shaped, preventing it from being taken up to the
end.
ON : Takes up the cloth with the tension method without using
the slack sensor. With this method, wrinkle may occur
easily at the platen. It is necessary to frequently adjust
the strength of the torque limiter to the minimum allow
able torque.
OFF : Does not take up the cloth.
STEP
1. Select a type.
(See page 3.4). Here, select [Type.1].
2. Push the [ENTER] key.
3. Push the [ ] and [ ] key until the display
gives the indication [TAKE-UP].
4. Push the [ENTER] key.
5. Push the [ ] and [ ] JOG keys to select the
take-up method.
[INTERVAL], [ON], [OFF]
6. Push the [ENTER] key.
7. Push the [END] key twice, and the menu re-
turns to the LOCAL mode.
SET UP
SELECT
: TYPE.1
TYPE.1
MEDIA COMP.
< ent >
TYPE.1
TAKE-UP
< ent >
TYPE.1
TAKE-UP
: INTERVAL
TYPE.1
TAKE-UP
: ON
TYPE.1
TAKE-UP
< ent >
<< LOCAL >>
width : 1272mm