MIMAKI TextileJet Tx2-1600 Series, Руководство по эксплуатации

Страница: 49 / 154

- 1.29 -
Types of ink
3 types of ink are available for this plotter at the moment and 2 types of ink can be used from these 3.
The characteristics of each ink type are described below.
• Be sure to use MIMAKI Geruine Ink cartridges.
Even during the warranty period, failures occurring through the use of non-
MIMAKI genuine ink will be handled on a fee basis.
Acid dye ink [Acid] : Suitable for wool, silk, and other animal fibers and nylon.
Available ink colors include black, cyan, magenta, yellow, light cyan,
light magenta, gray, blue and red.
Disperse dye ink [Disp] : Suitable for polyester, acrylic, etc.
Available ink colors include black, cyan, magenta, yellow, light cyan,
light magenta, gray, blue and light blue.
Reactive dye ink [Reac] : Suitable for wool, silk in addition to cotton, rayon, etc.
Available ink colors include black, cyan, magenta, yellow, light cyan,
light magenta, gray, blue, oraange, red and golden yellow.
IC chip in Ink cartridge
Ink cartridges for this plotter are provided with IC chip.
Do not use ink cartridges without IC chip.
The IC chip offers the information about the amount of remaining ink to the plotter.
• Do not use ink cartridges without IC chip.
• Do not touch or stain the contact of the cartridge PCB, as this may cause
failure of the PCB.
• The IC chip incorporates a unique ID number for the ink cartridge. The
plotter identifies the same ink cartridge even after it is removed from the
slot and remounted.
During long-time printing or when no ink cartridge can be replaced during
printing, check the amount of remaining ink of ink cartridges which are
identified by the IC chip. Use ink cartridges with sufficient amount of ink.