MIMAKI TextileJet Tx2-1600 Series, Руководство по эксплуатации

Страница: 79 / 154

- 2.3 -
Functions of the JOG keys
Each of the JOG keys varies in function according to the time at which it is used.
The functions of the JOG keys are explained below.
Before the detection After the detection When selecting a
When inputting a
choice selected among
of a sheet of a sheet function
several alternatives
Shifts the carriage to
the left.
Shifts the carriage to
the right.
Shifts the fabric away Restores the last Selects the next
from you. previous function. value.
Moves the fabric toward Moves to the next Selects the last previous
you. function. value.
•
Do not use reverse feed. (Move the fabric forward.)
The cloth may be caught by the platen and stained by set-off ink. Slack may occur at the run-out
device and necessary tension may not be obtained when starting next printing. If you need to perform
reverse feed, keep the above points in mind.
MENU mode
A list of setting items displayed on the LCD is called a menu.
A specific operation specified on the operation panel is displayed on the LCD in one of the follow-
ing three modes.
Each of the three modes is explained below.
<<LOCAL>> mode
This is the mode in which the preparations for printing operation are made.
When the power is switched on and the detection of a fabric is completed, the device enters the
LOCAL mode. In this mode, it is possible to perform the following operations.(See page 1.20)
1. Pushing the appropriate [JOG] keys to detect a fabric and set up an origin.
2. Pushing the [TEST] key to start test printing.
3. Pushing the [CLEANING] key to clean the head.
4. Pushing the [DATA CLEAR] key to erase the printing data the device has received.
5. Pushing the [FUNCTION] key to set printing conditions.
• In the LOCAL mode, the device cannot plot data received from the com-
puter.
To put the device into operation, change the mode to the REMOTE mode
by pushing the [REMOTE] key.
<< REMOTE >> mode
This is the mode in which the device plots an image from data it receives from the computer.
If the device is in the LOCAL mode, push the [REMOTE] key to put the device into the REMOTE
mode.
<<FUNCTION >> mode
This is the mode in which printing conditions can be set.
To set printing conditions, push the [FUNCTION] key while the device is in the LOCAL mode and
switch to the FUNCTION mode (printing function setting mode).