MIMAKI TextileJet Tx2-1600 Series, Руководство по эксплуатации

Страница: 71 / 154

- 1.51 -
OTHER SETTINGS
Attaching the platen boards
Attach the platen boards when using a fabric without ink penetration.
Set the attachment position and orientation of the platen boards in three steps according to the
degree of ink penetration. (See page 1.12)
Switching the winding direction of the fabric
The take-up device is mounted with a switch that specifies the direction in which a fabric is wound.
UP : The take-up device winds
the fabric with its printing
face faced out.
OFF : The take-up device will not
wind the fabric.
DOWN : The take-up device winds the
fabric with its printing face
faced in.
•
With this device, do not set the switch of the
take-up device to UP except when you
release the fabric from the take-up device.
The F cover
is closed.
The F cover
is open.
Loosen eight screws
and then close
the F cover L and R.
Loosen eight screws
and then open the
F cover L and R.
(Top position)
(Bottom position)