LC Packings Probot 161403, Руководство пользователя

Страница: 25 / 118

Installation and Getting Started
User’s Manual Probot
D960R3
2-5
2.3.2 Drive Table Safety Brackets
Two safety brackets (two pieces of metal) are used to secure the drive table as
shown in FIGURE 2-3.
To remove the drive table safety brackets:
a) Remove the top cover as described in Section 2.3.1.
b) Remove the piece of styrofoam supporting the table unit.
c) Unscrew the four screws that hold the brackets in place (item 1-4;
FIGURE 2-3).
d) Remove the brackets.
e) Replace the covers.
2
3
4
1
FIGURE 2-3 Removing the Safety Brackets - Location of the Screws
CAUTION
Caution: Do not keep these screws in the original holes inside Probot. The
movement of the Probot table may be seriously impaired by these screws!
Note: Keep all screws and the two safety brackets in the accessory box in case
it is necessary to move the Probot in future.
Note: It is recommended that you check the alignment whenever the instrument
has been moved (e.g. after shipping or relocation of the instrument). See
APPENDIX C for more details.