LC Packings Probot 161403, Руководство пользователя

Страница: 24 / 118

Installation and Getting Started
2-4
D960R3
User’s Manual Probot
2.3.1 Removing the Top Cover
To remove the top cover of the Probot:
a) Remove the needle cover that covers the needle tee.
b) Remove the left door and right door by simply lifting them few centimeters
(item 1; FIGURE 2-1).
4
3
2
1
Top Cover
Rear Cover
Needle Cover
FIGURE 2-1 Removing the Covers – Left Side View
c) Remove the screw on the left side (item 2; FIGURE 2-1) and the screw on
the right side that hold the rear cover. Remove the rear cover.
d) Remove the two black screws on the lower left side (item 3, 4; FIGURE 2-1)
and the two screws on the lower right side that hold the top cover.
1
2
FIGURE 2-2 Removing the Rear Cover
e) Remove the two screws (item 1, 2; FIGURE 2-2).
f) Carefully lift the top cover.
CAUTION
Caution: When replacing the covers, take care not to bend or damage any tubing
or cable.