LC Packings Probot 161403, Руководство пользователя

Страница: 17 / 118

Introduction
User’s Manual Probot
D960R3
1-3
The following options are available for the Probot:
• Manual Control Unit – allows for moving the sample table manually.
•
Dosage Module – The dosage module consists of a 4 way rotary valve with a
syringe drive and a 100 µ L syringe. It can be used in different modes:
- Continuous Flow Mode – a matrix solution/reagent is added on a
continuous basis (nL/min to µL/min).
- Dosage Mode –a user-defined volume is added to each sample.
- Wash Mode – the needle can be entirely flushed to avoid crystallization of
the matrix solution.
• µ-Tee for Matrix Addition – allows for adding the matrix solution before the
needle directly in the Nano flow path (default configuration).
•
Standard Needle Tee – allows for adding the matrix solution through the
hollow needle co-axially at the needle tip (supplied with the instrument).
•
Camera Option – A camera kit (P/N 160590) is available which allows for easy
monitoring of the needle and target(s) in conjunction with µCarrier 2.x or a
standalone monitor.
•
Pipetting Option – The pipetting option (P/N 161072) allows for pipetting from
a source plate (e.g. a well plate) to a destination plate (e.g. MALDI target). It
consists of a Teflon tube (45 cm, I.D. 250
µ m) with fittings and a fused silica
capillary (15 cm, O.D. 280 µ m, I.D. 100 µ m).
•
Waste Removal Option – allows the user to remove undesired portions of the
separation (‘waste’) without the need to spot them onto the target. A vacuum
can be applied to draw the solvent into a waste container.