LC Packings Probot 161403, Руководство пользователя

Страница: 12 / 118

Warnings and Safety Precautions
xii
D960R3
User’s Manual Probot
3) If a leak occurs, turn off power to the instrument and remedy the situation
immediately.
4) All components of the system should be plugged into a common power line
that is directly connected to a true ground.
5) Always replace blown fuses with fuses of the same size and rating indicated
on the fuse holder and panel. Refer to Section 3.3.8 of this manual for more
information on how to replace fuses.
6) Repair or replace faulty power cords and all communication cables.
7) Many organic solvents and buffers are toxic. Make certain that you know the
toxicological properties of all mobile phases that you are using.
8) The toxicological properties of many samples may not be well known. If you
have any doubt about a sample, treat it as if it contained a potentially
harmful substance.
9) Wear protective eye goggles when handling mobile phases or operating the
instrument. An eye wash facility and a sink should be close to the unit. If
any mobile phase is splashed on the eyes or skin, wash the affected area
and seek medical attention.
10) Dispose of all waste mobile phase in an environmentally safe manner that is
consistent with all local regulations. Do not allow flammable and/or toxic
solvents to accumulate. Follow a regulated, approved waste disposal
program. Never dispose flammable and/or toxic solvents through the
municipal sewage system
11) Wear protective eye goggles when handling fused silica tubing (i.e.
installation, cutting etc.)
12) If a buffer is used as a part of the mobile phase, flush the system with
several volumes of a methanol/water (50/50) solution before it is shut down.
This will prevent salt buildup inside the unit.
13) Do not use the instrument in ways other than those indicated in the
instructions given in this manual.