LC Packings Probot 161403, Руководство пользователя

Страница: 65 / 118

Installation and Getting Started
User’s Manual Probot
D960R3
2-45
FIGURE 2-48 The XYZ Robot Module Section
b) Choose the External button to control the position of the table manually with
the manual control unit (FIGURE 1-3 on page 1-4).
c) To control the position of the table:
•
Choose the X+ and X- buttons to move the table to the left or right side
(X-direction).
• Choose the Y+ and Y- buttons to move the table to the back or to the
front (Y-direction).
• Choose the Z+ and Z- buttons to move the table up and down
(Z-direction).
d) Select the Internal button in the Robot window. The current X,Y,Z
coordinates are displayed (in ‘mm’).
e) To change from step mode to continuous movement, press the appropriate
button of the manual control unit.
f) To change the length of each step, adjust the stepwidth parameter.
2.8.6 Measure the Column (X) and Row (Y) Distance
The dimensions of the target, e.g. the exact distance between each column (X
1
-
X
2
) and the distance between each row (Y
1
-Y
2
) are essential for the proper
positioning of the needle (table) and control of the Probot Micro Fraction
Collector.
Even the smallest deviation may result in a significant offset error because it
accumulates. There are several ways to obtain the appropriate data, either you
can get this data directly from the manufacturer of the sample carriers or
measure the distances with help of the manual control options (Section 2.8.2).