LC Packings Probot 161403, Руководство пользователя

Страница: 16 / 118

Introduction
1-2
D960R3
User’s Manual Probot
1.2 General Design of the Probot Micro Fraction Collector
The general configuration of the system (with sample deposition on a MALDI
target and the Dosage Module option) is presented in FIGURE 1-1.
X
Flow Cell
Wa
st
e
Fi
ll
Wa
sh
Y
Z
Needle
Capillary
µ- Tee
Table
Dosage
Module
Rotary
Valve
Syringe
From LC/CZE
System
Probot
™
UltiMate ™ UV Detector
Vials
Union
Target
FIGURE 1-1 General Configuration of the Probot Micro Fraction Collector
The Probot Micro Fraction Collector is supplied with a µ-Tee connection
(FIGURE 1-1). The lower end of the needle Tee holds a hollow needle in which a
fused silica capillary is mounted, the horizontal inlet is used to add reagent (e.g.
a matrix solution) to the sample using the Dosage Module and the upper
connection is connected to the LC/CZE system (e.g. the capillary flow cell outlet
of the UltiMate UV detector).