LC Packings Probot 161403, Руководство пользователя

Страница: 72 / 118

Maintenance and Troubleshooting
3-4
D960R3
User’s Manual Probot
3.3.2 Installing the Video Camera
A camera kit (P/N 160590) which allows for easy monitoring of the needle and
target(s) is available as an option.
To install the video camera:
a) Locate the nut close to in the support bar to the µ-Tee (item 1; FIGURE 3-2).
3
2
4
1
Support Bar
with Nut
5
FIGURE 3-2 Installing the Video Camera
b) Use the long knurled screw to attach the camera to the support bar (item 2;
FIGURE 3-2).
c) Plug the connector into the socket on the back of the support bar (item 3;
FIGURE 3-2).
d) Connect the VIDEO output on the Probot back panel to the monitor using the
connecting cable provided with the camera.
e) Set the monitor to video mode.
f) Adjust the camera position and tighten the knurled screws.
CAUTION
Caution: Make certain that the table and/or the target does not touch the camera
to avoid any damage to the camera.
3.3.3 Replacing the Syringe
The Probot Micro Fraction Collector is supplied with a 100 µL syringe
(P/N 161080).
To replace the syringe:
a) Disconnect the tubing that goes to the rotary valve (e.g. unscrew the Luer-
Lock adapter from the syringe, item 1, 2; FIGURE 3-3).