LC Packings Probot 161403, Руководство пользователя

Страница: 93 / 118

Appendix B
User’s Manual Probot
D960R3
B-5
d) If you want µ Carrier to prevent overfilling of the vessels, activate overfill
control . The Probot will then automatically move to the next fraction when
the vessel is full (calculated by vessel volume and flow rate).
e) For the remote start of µ Carrier, select the Wait for contact start … from the
Relay Table tab (FIGURE B-6). The µ Carrier software will use the start delay
from the General tab (FIGURE B-4).
FIGURE B-6 The Relay Table Tab
f) Start the program.
In the fraction action window you can see which fraction (or waste) has been
put in what vessel (FIGURE B-7).
FIGURE B-7 Fraction Action Window
To setup µ Carrier for peak collection using one waste vessel: