LC Packings Probot 161403, Руководство пользователя

Страница: 37 / 118

Installation and Getting Started
User’s Manual Probot
D960R3
2-17
2.7.2 Using the Predefined Applications, Trays and Sample Carriers
In addition to the predefined sample carriers and trays, µCarrier V2.0 provides
ready-to-use applications for the most common used MALDI MS instruments.
These applications are based on a ‘Basic fractionation task’, which is a time
controlled collection by default. It requires only three steps to run such an
application.
• Loading a Predefined Application – Section 2.7.2 A
•
Alignment of the Sample Carriers– Section 2.7.3
• Checking and Modifying Application Parameters – Section 2.7.4
As an example, the following sections will present in detail how to use and
modify the predefined application for a time controlled fractionation application
onto 6 Applied Biosystems® OptiTof
™
24x24 targets. While this example may
not meet the specific needs of your application, it is likely that it can be used
with minor modification.
2.7.2 A Loading a Predefined Application
a) Activate the Application Editor by selecting the ApplicationEditor button.
b) Select the Show Browser button to replace the list of available ‘Tasks’ by the
browser pane (FIGURE 2-12).
Available
Tasks
Browser
Pane
FIGURE 2-12 Left - List of available Tasks, Right – The Browser Pane
c) Select the desired application, and then double click to load this application.
All parameters of this task are then loaded in the Application Editor and in
the Tray Editor (FIGURE 2-13).