manualshive.com logo in svg

Korg Electronic Keyboard, Руководство по параметрам

Электронное клавишное устройство Kogan - отличный способ выразить свой талант в музыке. На нашем сайте вы можете бесплатно скачать инструкцию пользователя, чтобы научиться эффективно использовать это устройство. Загрузите ее с manualshive.com и создавайте удивительную музыку с помощью клавишного инструмента Kogan.

Поделиться
Скачать
background image

Global mode

674

If you check “Assign” for the key you select here, the 
DS1–4, Voice Assign Mode, and Mixer parameters (see 
below) will be used.

Assign

[Off, On]

On (checked):

 The drum samples you assigned for 

DS1–4 will sound. Normally you will check this 
parameter.

Off (unchecked):

 The selected drum samples will be 

invalid, and the drum samples of the key to the right 
will sound. At this time, the pitch will be a semitone 
lower than the pitch of the key to the right. Uncheck 
this parameter when you wish to play a drum sample 
at differing pitches.

5–1b: Drumsample

You can specify up to four drum samples. The process 
is the same as for the Single or Double multisample 
settings in Program mode (HD-1). “Bottom Velocity” 
and “Xfade Range” specify the velocity zone in which 
DS1, 2, 3, and 4 will sound.

DS1 (High): (Drumsample1 High)

These are the settings for the first (High) velocity zone.

If you want to create a simple setup using only one 
drum sample, make the appropriate settings in DS1, 
and then set “Bottom Velocity” to 1 and “Xfade Range” 
to Off.

 DS1(High) On/Off

[Off, On]

On (checked):

 Check this if you want to use DS1 

(High). The selected drum sample will sound.

Off (unchecked):

 DS1 (High) will not be used. The 

drum sample will not sound.

Note:

 Normally, you will start by using DS1 (before 

using DS2–4). If you don’t want to switch drum 
samples by velocity, turn on only DS1. If you’re using 
multiple velocity-switched drum samples, make 
settings as follows.

One velocity zone

DS1: On, DS2: Off, DS3: Off, DS4: Off

Two velocity zones

DS1: On, DS2: On, DS3: Off, DS4: Off

Three velocity zones

DS1: On, DS2: On, DS3: On, DS4: Off

Four velocity zones

DS1: On, DS2: On, DS3: On, DS4: On

Bank

[ROM mono, ROM stereo, RAM mono,

RAM stereo, EXs* mono, EXs* stereo]

Drumsample Select

[000…416, 0000…3999,

000…]

Specify the DS1 drum sample by bank and drum 
sample number.

The banks are organized into three main types; ROM, 
RAM, and EXs. For each type, you can choose either 
mono or stereo multisamples. However, stereo 
multisamples use up twice as many voices as mono 
multisamples.

ROM:

 These are the OASYS’s standard preset drum 

samples.

RAM: 

These are user samples. You can choose samples 

you created in Sampling mode or loaded in Disk mode. 
In Disk mode, you can load not only KORG format 
sample files, but also AKAI S1000/S3000 format, AIFF 
format, and WAVE format data as samples, and use 
them as drum samples.

EXs*: 

These are the OASYS’s standard EXs drum 

samples. In addition, if you have installed/loaded 
EXCD-SND series OASYS PCM Expansion Option 
CDs, these will be displayed with their type shown in 
the * area, and can be selected. The number of drum 
samples will differ depending on the EXs.

ROM mono, ROM stereo Select menu

When you press the “Drumsample Select” popup 
button a drum sample list will appear, allowing you to 
choose drum samples from the list.

Use the tabs to choose a category, and then choose a 
drum sample from within the category. Press the OK 
button to execute, or press the Cancel button to cancel.

It is not possible to edit the category names of drum 
samples, or to re-assign the category.

If you choose “Bank” ROM Mono:

Mono drum samples will be displayed. The L-channel 
or R-channel of the stereo drum samples selectable via 
Bank: ROM Stereo can also be selected as mono drum 
samples. In these cases, -L or -R is shown following the 
drum sample of the same name.

If you choose “Bank” ROM Stereo:

Only stereo drum samples will be displayed.

Keys to which drum samples are 
assigned are shown in red.

“KEY”:  The selected key is shown in blue.
You can select a key by holding down the ENTER switch and playing the 
desired note.

Keyboard range

C4 key

Drum Kit, Key Select, Assign

Содержание Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Electronic Keyboard

Waldorf KB 37 User Manual preview
KB 37
Бренд: Waldorf Страницы: 21
XtendLan KEYBPTZ3DPJ-LAN User Manual preview
KEYBPTZ3DPJ-LAN
Бренд: XtendLan Страницы: 34
C-KO RS-4-18-R-I Fitting Instructions preview
RS-4-18-R-I
Бренд: C-KO Страницы: 4
Logitech 967684 0403 - Alto Wired Keyboard User Manual preview
967684 0403 - Alto Wired Keyboard
Бренд: Logitech Страницы: 2
SMK-Link VP3810-TAA User Manual preview
VP3810-TAA
Бренд: SMK-Link Страницы: 1
COP Security Symphony User Manual preview
Symphony
Бренд: COP Security Страницы: 24
Infinite Response VAX77 User Manual preview
VAX77
Бренд: Infinite Response Страницы: 96
iClever IC-BK10 User Manual preview
IC-BK10
Бренд: iClever Страницы: 10
Toshiba PA3959 User Manual preview
PA3959
Бренд: Toshiba Страницы: 32
Runtastic TP00270 Operation Manual preview
TP00270
Бренд: Runtastic Страницы: 16
Wismec Reuleaux RX2 Manual preview
Reuleaux RX2
Бренд: Wismec Страницы: 8
Gigabyte Force K7 Quick Start Manual preview
Force K7
Бренд: Gigabyte Страницы: 45
ACME WS04 User Manual preview
WS04
Бренд: ACME Страницы: 18
STI Wireless Driveway Monitor STI-30100 Installation And Operation Manual preview
Wireless Driveway Monitor STI-30100
Бренд: STI Страницы: 6
Trust Slimline KB-1800S Manual preview
Slimline KB-1800S
Бренд: Trust Страницы: 2
Totally Wicked Tornado V5 BDC User Manual preview
Tornado V5 BDC
Бренд: Totally Wicked Страницы: 2
Roland BK-5OR Owner'S Manual preview
BK-5OR
Бренд: Roland Страницы: 134
Art. Lebedev Maximus Keyboard User Manual preview
Maximus Keyboard
Бренд: Art. Lebedev Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды