manualshive.com logo in svg

Korg Electronic Keyboard, Руководство по параметрам

Электронное клавишное устройство Kogan - отличный способ выразить свой талант в музыке. На нашем сайте вы можете бесплатно скачать инструкцию пользователя, чтобы научиться эффективно использовать это устройство. Загрузите ее с manualshive.com и создавайте удивительную музыку с помощью клавишного инструмента Kogan.

Поделиться
Скачать
background image

Sequencer mode

440

Note: With some EX

i

 instruments, such as the CX-3, 

notes cannot be panned individually. For these EX

i

, 

Random

 pan will move all sounding notes to a 

different pan position at each note-on.

EQ Trim

[00…99]

This controls the volume level going into the EQ.

High settings of the Low, Mid, and High Gain controls 
can cause substantial increases in the overall level. You 
can compensate for this by turning down the input 
trim.

Note: if the EQ page EQ Bypass parameter is turned 
On, then none of the EQ parameters here will have 
any effect.

Low EQ

[–18…+00.0…+18.0dB]

This controls the gain of the 80Hz Low Shelf EQ, in 
increments of 0.5dB.

Mid EQ Freq

[100Hz…10kHz]

This sets the center frequency for the Mid sweep EQ.

Mid EQ Gain

[–18.0…+00.0…+18.0dB]

This controls the gain of the Mid Sweep EQ, in 
increments of 0.5dB.

High EQ

[–18.0…+00.0…+18.0dB]

This controls the gain of the 10kHz High Shelf EQ, in 
increments of 0.5dB.

Send 1

[000…127]

This controls the send level into FX Send 1. If the 
Track’s 

Output Bus

 parameter is set to L/R or OFF, it 

scales the Oscillator send levels. If the 

Output Bus

 is 

set to IFX 1–12, it directly controls the post-IFX send 
levels.

Send 2

[000…127]

This controls the send level into FX Send 2. For more 
details, see 

Send 1

, above.

Knobs 1/9–8/16, Individual Pan

When the Mixer Knobs switch is set to Individual Pan, 
the knobs will control the Pan for the current group of 
Tracks. Knob 1 controls the pan for Track 1, knob 2 
controls the pan for Track 2, and so on.

These duplicate the Song’s Track Pan parameters; 
changing them here will change them in the editing 
pages, and vice-versa.

Pan 1/9

[Random, L001…C064…R127]

This controls the stereo pan of either Track 1 or Track 9, 
depending on whether the 

TIMBRE/TRACK

 button is 

set to 1–8 or 9–16.

A setting of 

L001

 places the sound at the far left, 

C064

 

in the center, and 

R127

 to the far right.

Random

 is available only via the LCD. (Otherwise, it 

would be difficult to use the knob to sweep smoothly 
from left to right.) With the 

Random

 setting, the pan 

position will be different for each note-on.

Note: with some EX

i

 sounds, such as the CX-3, 

Random

 pan may affect all notes at once.

Pan 2/10–8/16

[Random, L001…C064…R127]

These control the stereo pan of Tracks 2–8 or 10–16, 
depending on the setting of the 

TIMBRE/TRACK

 

button. For more details, see 

Pan 1/9

, above.

Play/Mute switches 1/9–8/16

The top row of switches allow you to turn each of the 
Tracks on and off.

Play/Mute 1/9

[Off, On]

This controls the play/mute status of either Track 1 or 
Track 9, depending on whether the 

TIMBRE/TRACK

 

button is set to 1–8 or 9–16.

When this switch is on (LED = on), Track 1 will play. 
When the switch is off (LED = off), Track 1 will be 
muted.

Play/Mute 2/10–8/16

[Off, On]

These control the play/mute status of Tracks 2–8 or 10–
16, depending on the setting of the 

TIMBRE/TRACK

 

button.

For more details, see 

Play/Mute 1/9

, above.

Solo switch and Select switches 1/9–8/16

Solo

[Off, On]

Solo lets you isolate one or more MIDI Tracks, HDR 
Audio Tracks, or Audio Inputs, so that you hear them 
by themselves. It does this by temporarily muting all 
non-soloed Tracks and Inputs.

Solo uses the Select switches. These switches can show 
and control either which Track is currently selected, or 
which Tracks are soloed. The main Solo button lets you 
switch back and forth between the two views.

When the Solo button is 

Off

 (LED = Off), the Select 

switches select the current Track; when the Solo button 
is 

On

 (LED = On or blinking), the Select switches let 

you solo one or more Tracks.

When Solo is 

On

, and one or more Tracks or Audio 

Inputs are soloed, the Solo LED will blink on and off to 
remind you that solo is in use.

NOTE

: The main Solo button merely changes the 

functions of the Select switches. It does not enable or 
clear the individual solo states.

Clearing all solos

To clear all solos:

1. Press and hold the CONTROLLER RESET button.
2. While holding CONTROLLER RESET, press the 

SOLO button.

Exclusive Solo menu parameter

The menu’s 

Exclusive Solo

 parameter also affects the 

way that Solo works. When 

Exclusive Solo

 is 

Off

 

(unchecked), you can solo multiple Tracks and inputs 
at once.

When 

Exclusive Solo

 is 

On

 (checked), only one MIDI 

Track, HDR Track, or Audio Input can be soloed at a 
time. In this mode, pressing a Solo switch 
automatically disables any previous solos.

Содержание Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Electronic Keyboard

Elan eSK-R30B-X Manual preview
eSK-R30B-X
Бренд: Elan Страницы: 29
C.Giant LP-6210B User Manual preview
LP-6210B
Бренд: C.Giant Страницы: 16
lmp wkp-1314 Troubleshooting Manual preview
wkp-1314
Бренд: lmp Страницы: 4
True SHOWRUNNER Owner'S Manual preview
SHOWRUNNER
Бренд: True Страницы: 33
Sven KB-E5600H User Manual preview
KB-E5600H
Бренд: Sven Страницы: 4
Ortek PKA-1720A User Manual preview
PKA-1720A
Бренд: Ortek Страницы: 10
Life Fitness Video Gaming Accessories User Manual preview
Video Gaming Accessories
Бренд: Life Fitness Страницы: 51
Ectaco Partner ECS430T User Manual preview
Partner ECS430T
Бренд: Ectaco Страницы: 24
Kawai FS650 Owner'S Manual preview
FS650
Бренд: Kawai Страницы: 46
ZeroRPM IMS2 Operator'S Manual preview
IMS2
Бренд: ZeroRPM Страницы: 41
Nacon CL-520 Manual preview
CL-520
Бренд: Nacon Страницы: 41
Waeco Refresh-o-mat HD Operating Manual preview
Refresh-o-mat HD
Бренд: Waeco Страницы: 300
Hama 00123512 Operating Instructions Manual preview
00123512
Бренд: Hama Страницы: 27
Infinite Response VAX77 User Manual preview
VAX77
Бренд: Infinite Response Страницы: 96
GETT CK4W Quick Start preview
CK4W
Бренд: GETT Страницы: 2
Nektar Panorama T4 User Manual preview
Panorama T4
Бренд: Nektar Страницы: 24
Wismec Vicino D30 User Manual preview
Vicino D30
Бренд: Wismec Страницы: 2
CME UF5 User Manual preview
UF5
Бренд: CME Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды