manualshive.com logo in svg

Korg Electronic Keyboard, Руководство по параметрам

Электронное клавишное устройство Kogan - отличный способ выразить свой талант в музыке. На нашем сайте вы можете бесплатно скачать инструкцию пользователя, чтобы научиться эффективно использовать это устройство. Загрузите ее с manualshive.com и создавайте удивительную музыку с помощью клавишного инструмента Kogan.

Поделиться
Скачать
background image

EXi: MS-20EX

290

On (LED lit): 

When 

TEMPO SYNC

 is 

On

, the MG 

synchronizes to the system tempo, as set by either the 
Tempo knob or MIDI Clock. The MG speed is 
controlled by the combination of the 

BASE NOTE 

and 

FREQUENCY/TIMES 

parameters, below.

Off (LED dark): 

When 

TEMPO SYNC

 is 

Off

, the 

FREQUENCY/TIMES

 knob determines the speed of 

the MG, and the 

BASE NOTE setting 

has no effect.

This parameter is not modulatable via AMS.

KEY SYNC

[ON, OFF]

Touch the text/LED area to turn 

KEY SYNC

 on and 

off.

If this setting is 

ON

, the phase is reset for the first note-

on in each legato phrase. Subsequent notes in a chord, 
or notes played legato, do not cause the phase to be 
reset.

This parameter is not modulatable via AMS.

BASE NOTE

[1/1…1/32]

When 

TEMPO SYNC

 is 

ON, 

this sets the basic speed 

of the MG, relative to the system tempo. The values 
range from a 32nd note to a whole note, including 
triplets. This value is then multiplied by the 

FREQUENCY/TIMES

 knob, below.

When 

TEMPO SYNC

 is 

OFF

, this parameter has no 

effect.

This parameter is not modulatable via AMS.

WAVE FORM

[

…

…

]

This controls the waveform of the 

MODULATION 

GENERATOR

. The MG always generates both the 

Rectangle and Sawtooth/Triangle waveforms, and 
each is available simultaneously via the Patch Panel. 
The 

WAVE FORM

 knob controls the pulse width of the 

Rectangle wave, and makes the Sawtooth/Triangle 
“lean” from left to right, as shown in the graphics.

FREQUENCY/TIMES

[0.00...10.00/16...1]

If 

TEMPO SYNC

 is 

OFF

, this controls the frequency of 

the MG.

If 

TEMPO SYNC

 is 

ON

, this multiplies the length of 

the 

BASE NOTE

. For instance, if the 

BASE NOTE

 is 

set to a sixteenth note, and Times is set to 3, the MG 
will cycle over a dotted eighth note. Note that higher 
values mean a faster MG.

Frequency/Times LED

This LED gives a visual indication of the LFO speed. 
Note that the LED is 

on

 when the MG’s pulse/square 

waveform is 

low

. Initially, this seems like the opposite 

of what one might expect. When using the MG to 
trigger the EGs, however, this makes perfect sense: the 
EGs start when the LED goes on, and release when the 
LED goes off.

5–1c: ENVELOPE GENERATOR 1

By default, EG 1 is triggered by note-ons. However, 
you can use the Patch Panel’s 

TRIG IN

 or 

EG 1 TRIG 

IN

 jacks to trigger it from a different source, such as 

the MG, AMS sources, or the ESP’s 

TRIG OUT

 jack. 

For more information, see “TRIG IN jack” on page 297.

EG1 is normalled to VCO frequency modulation 
(scaled by the 

EG1/EXT

 knob), as well as the MVCA 

control input (see “6–1f: Modulation VCA (MVCA)” 
on page 298).

DELAY TIME

[0.00…10.00]

Adjusts the time from when the trigger occurs (e.g., 
note-on) until the 

ATTACK TIME

 starts.

For standard attack-release behavior, set the 

DELAY 

TIME

 to 0.00.

ATTACK TIME

[0.00…10.00]

Adjusts the time from the end of the 

DELAY TIME

 

until the EG reaches its maximum value.

RELEASE TIME

[0.00…10.00]

Adjusts the time from when the trigger is released 
(e.g., note-off) until the level decays to zero.

5–1d: ENVELOPE GENERATOR 2

By default, EG 2 is triggered by note-ons. However, 
you can use the Patch Panel’s 

TRIG IN

 jack to trigger 

it from a different source, such as the MG, AMS 
sources, or the ESP’s 

TRIG OUT

 jack. For more 

information, see “TRIG IN jack” on page 297.

EG 2 is hard-wired to the VCA, and also normalled to 
control the HPF and LPF. You can easily use other EGs 
for the filters, via AMS; using other EGs for the VCA is 
possible but slightly more tricky, as described under 
“Using EGs 3–6 to control the amplitude” on page 291.

HOLD TIME

[0.00…10.00]

Adjusts the time for which the input state of the trigger 
signal (e.g., note-on) is held after the trigger is released.

If the EG is triggered by a very short pulse, it may not 
have time to complete its attack and decay times before 
going into release. Increasing the 

HOLD TIME

 

effectively makes the trigger pulse longer, giving the 
EG more time to complete its attack and decay.

Trigger On

Trigger Off

Attack

Time

Delay

Time

Release

Time

Change to
Parameter
Value

Time

Trigger On

Trigger Off

Attack

Time

Decay

Time

Release

Time

Change to
Parameter
Value

Sustain

Level

Time

Содержание Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Electronic Keyboard

M-Audio Keystation Mini 32 User Manual preview
Keystation Mini 32
Бренд: M-Audio Страницы: 45
M-Audio KEYRIG 25 User Manual preview
KEYRIG 25
Бренд: M-Audio Страницы: 27
M-Audio PROKEYS SONO 61 User Manual preview
PROKEYS SONO 61
Бренд: M-Audio Страницы: 49
M-Audio Ozonic User Manual preview
Ozonic
Бренд: M-Audio Страницы: 38
Yamaha Arius YDP-V240 Data List preview
Arius YDP-V240
Бренд: Yamaha Страницы: 4
Ironton 44596 Owner'S Manual preview
44596
Бренд: Ironton Страницы: 7
Azio KB335 User Manual preview
KB335
Бренд: Azio Страницы: 5
Active Key AK-C4400 User Manual preview
AK-C4400
Бренд: Active Key Страницы: 2
VooPoo Uforce T2 Manual Instruction preview
Uforce T2
Бренд: VooPoo Страницы: 8
Fcar F7S series Product Manual preview
F7S series
Бренд: Fcar Страницы: 56
Logitech TYPE - S Setup Manual preview
TYPE - S
Бренд: Logitech Страницы: 24
Logitech K800 Getting Started Manual preview
K800
Бренд: Logitech Страницы: 34
Logitech G913 Manual preview
G913
Бренд: Logitech Страницы: 51
Logitech 968019-0403 - Classic Keyboard 200 Wired Limited Warranty preview
968019-0403 - Classic Keyboard 200 Wired
Бренд: Logitech Страницы: 2
Logitech G510 Getting Started preview
G510
Бренд: Logitech Страницы: 148
Wismec noisy cricket II Quick Manual preview
noisy cricket II
Бренд: Wismec Страницы: 2
Omron HJ-303 User Manual preview
HJ-303
Бренд: Omron Страницы: 24
Thermaltake ARGENT K6 RGB User Manual preview
ARGENT K6 RGB
Бренд: Thermaltake Страницы: 99

Бренды по названию

Популярные бренды

Загрузить еще бренды