Korg Electronic Keyboard, Руководство по параметрам

Страница: 476 / 1127

Sequencer mode
466
Sequencer P2: Track Parameters
2–1: MIDI
Here you can make MIDI-related settings for each
MIDI track.
2–1a: MIDI
Track 01 (Track Number)
Status [Off, INT, BTH, EXT, EX2]
This sets whether the Track controls the internal
sounds, external MIDI devices, or both.
When controlling external MIDI devices, it also allows
you to choose between using the internal Bank Select
numbers (as set by the front-panel buttons), or using
custom Bank Select settings to match the external
device.
Off:
Use this to disable the Track. With this setting, the
Track’s Program will not sound, and MIDI data will
not be transmitted. Also, any EX
i fixed resources used
by the Program will be freed.
INT:
When the musical data recorded in the MIDI
track is played back, or when you use
Track Select
(0–
1a) to select a MIDI track that is set to INT and play the
keyboard and operate the controllers, the internal tone
generator of the OASYS will sound, and MIDI data
will not be transmitted to an external device.
BTH:
The operation of both INT and EXT will be
performed. When the musical data recorded in the
MIDI track is played back, or when you select a MIDI
track that is set to BTH and play the keyboard and
operate the controllers, the internal tone generator of
the OASYS will sound, and at the same time MIDI data
will also be transmitted to an external device.
EXT:
When the musical data recorded in the MIDI
track is played back, or when you select a MIDI track
that is set to EXT and play the keyboard and operate
the controllers, MIDI data will be transmitted to an
external device, but the internal tone generator of the
OASYS will not sound.
When you select another song or return to the
beginning of the song, the program change, volume,
panpot, portamento, sends 1 and 2, post IFX pan, and
post IFX sends 1 and 2 of each MIDI track set to EXT
will be transmitted via MIDI.
EX2:
This enables you to specify a particular MIDI
Bank Select message for the Track, instead of
automatically using the Bank of the selected OASYS
Program. Use the parameters below, labeled
Bank
Select MSB and LSB (When Status =EXT2)
, to set the
Bank Select message as desired. In other respects this is
the same as EXT, described above.
MIDI data is transmitted and received on the MIDI
channel that is specified separately for MIDI track
by “MIDI Channel.”
0–1a
2–1a
1–1b
2–1PMC
Status
Keyboard, Sequencer,
& MIDI In
play Internal Sounds
Keyboard &
Sequencer Transmit
MIDI Out
OFF No No
INT Yes No
EXT No
Yes (using the Bank
Select message of the
track’s Program)