manualshive.com logo in svg

Korg Electronic Keyboard, Руководство по параметрам

Электронное клавишное устройство Kogan - отличный способ выразить свой талант в музыке. На нашем сайте вы можете бесплатно скачать инструкцию пользователя, чтобы научиться эффективно использовать это устройство. Загрузите ее с manualshive.com и создавайте удивительную музыку с помощью клавишного инструмента Kogan.

Поделиться
Скачать
background image

Sampling mode

606

Pan (CC#8) (Post IFX PanCC#8)

[L000…C064…R127]

Specifies the panning immediately after the insert 
effect.

You can use CC#8 to control this.

Bus Sel. (Bus Select)

[L/R, 1…8, 1/2…7/8, Off]

Specifies the bus to which the signal will be sent 
immediately after the insert effect.

L/R:

 The signal will be output to the L/R bus. Then 

after passing through TFX1 and TFX2, it will be output 
to AUDIO OUTPUT L/R. This is the normal setting.

1…8:

 The signal will be output in monaural to the 

selected AUDIO OUTPUT (INDIVIDUAL).

1/2…7/8:

 The signal will be panned by the “Pan 

(CC#8)” setting and sent in stereo to the selected 
AUDIO OUTPUT (INDIVIDUAL) pair.

Off:

 The signal will not be sent directly to the L/R or 

Individual buses. Use this setting if you want to apply 

Send1

 and 

Send2

 and then send the signal directly to 

the master effects.

FX Control Bus

[Off, 1, 2]

Sends the post-IFX signal to the FX Control buses. See 
“8–1d: REC Bus” on page 604.

REC Bus

[Off, 1…4, 1/2, 3/4]

Sends the post-IFX signal to the REC buses. See “8–1d: 
REC Bus” on page 604. If you want to resample via the 
REC buses, set 

Source Bus

 (0–8c) to REC 1/2 or REC 

3/4.

Send1

[000…127]

Send2

[000…127]

These adjust the level at which the post-IFX signal is 
sent to master effects 1 and 2. This is valid if 

Bus Select

 

(8–5a) is set to L/R or Off.

You can use CC#93 to control the Send 1 level, and 
CC#91 to control the Send 2 level. The global MIDI 
channel specified by 

MIDI Channel

 is used for 

these messages.

IFX2…12

Here you can specify each insert effect’s effect type, 
on/off status, chaining, and mixer settings following 
the insert effect. With the exception of 

Chain to

 and 

Chain

, the parameters are the same as for IFX1. See 

“IFX1” on page 605.

IFX2:

 Chain to

[IFX3…IFX12]

IFX3:

 Chain to

[IFX4…IFX12]

IFX4:

 Chain to

[IFX5…IFX12]

IFX5:

 Chain to

[IFX6…IFX12]

IFX6:

 Chain to

[IFX7…IFX12]

IFX7: 

Chain to

[IFX8…IFX12]

IFX8:

 Chain to

[IFX9…IFX12]

IFX9:

 Chain to

[IFX10…IFX12]

IFX10: 

Chain to

[IFX11…IFX12]

IFX11:

 Chain to

[(IFX12)]

These specify the chain destination for each insert 
effect. If 

Chain

 (check box) is on, the insert effect will 

be connected in series to the IFX specified by the 

Chain 

to

 setting.

8–5b: Resource Meter and Tempo

FX

EXi FIXED

FREE FOR VOICES

The number of voices you can play is affected by how 
effects and EXi are being used. This meter shows the 
resource allocation as an approximate percentage (%) 
of the total processing power. 

For more information, see “CX-3 & STR-1: Limitations 
on EXi fixed resources” on page 326, and “About 
effects resources” on page 727.

 (Tempo)

[040.00…240.00, EXT]

This specifies the tempo. This setting is used for 
controlling effects, etc.

▼ 

8–5: Page Menu Commands

The number before each command shows its ENTER + 
number-key shortcut. For more information on these 
shortcuts, see “ENTER + 0-9: shortcuts for menu 
commands” on page 138.

• 0: 

Copy Insert Effect

. For more information, see 

“Copy Insert Effect” on page 149.

• 1: 

Swap Insert Effect

. For more information, see 

“Swap Insert Effect” on page 150.

• 2: 

Insert IFX Slot

. For more information, see “Insert 

IFX Slot” on page 150.

• 3: 

Cut IFX Slot

. For more information, see “Cut IFX 

Slot” on page 151.

• 4: 

Clean Up IFX Routings

. For more information, 

see “Clean Up IFX Routings” on page 152.

Содержание Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Electronic Keyboard

WASD V3 Quick Reference Manual preview
V3
Бренд: WASD Страницы: 4
Kawai FS900 Owner'S Manual preview
FS900
Бренд: Kawai Страницы: 48
FEKER Alice-75 User Manual preview
Alice-75
Бренд: FEKER Страницы: 2
Kawai WK40 Owner'S Manual preview
WK40
Бренд: Kawai Страницы: 8
Zagg Rugged Book Go Instructions Manual preview
Rugged Book Go
Бренд: Zagg Страницы: 26
Casio LK100 - Lighted Keyboard With LCD Display User Manual preview
LK100 - Lighted Keyboard With LCD Display
Бренд: Casio Страницы: 40
Pyle PKBRD37WT User Manual preview
PKBRD37WT
Бренд: Pyle Страницы: 8
Rosewill NEON K42 Manual preview
NEON K42
Бренд: Rosewill Страницы: 4
Cross Technologies 2083-1919-02 Instruction Manual preview
2083-1919-02
Бренд: Cross Technologies Страницы: 18
Casio CELVIANO AP-220 Implementation Manual preview
CELVIANO AP-220
Бренд: Casio Страницы: 46
Max 130.103 Instruction Manual preview
130.103
Бренд: Max Страницы: 12
Casio LK-280 User Manual preview
LK-280
Бренд: Casio Страницы: 76
70mai UP03 User Manual preview
UP03
Бренд: 70mai Страницы: 47
Targus ECOSMART AKB873 User Manual preview
ECOSMART AKB873
Бренд: Targus Страницы: 9
Bosch IntuiKey User Manual preview
IntuiKey
Бренд: Bosch Страницы: 50
Brookstone 839115 Quick Manual preview
839115
Бренд: Brookstone Страницы: 12
Samsung ER-390 SERIES Service Manual preview
ER-390 SERIES
Бренд: Samsung Страницы: 2
Samsung ER-260 SERIES Service Manual preview
ER-260 SERIES
Бренд: Samsung Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды