Korg Electronic Keyboard, Руководство по параметрам

Страница: 671 / 1127

Global P2: Controller/Scale 2–2: User Scale
661
2–2a: User Octave Scale
User Octave Scale [User Octave Scale 00…15]
Selects the User Octave Scale that you want to edit.
Tune [–99…+99]
Makes pitch settings for each note in the octave.
When you adjust the pitch of each note in the octave
(C–B) in one-cent steps, your settings will be applied to
all octaves. This adjustment is relative to equal
temperament.
A setting of
–99
lowers the pitch approximately a
semitone below normal pitch.
A setting of
+99
raises the pitch approximately a
semitone above normal pitch.
The note can also be selected by holding down the
ENTER switch and playing a note on the keyboard.
By executing the page menu command “Copy Scale,”
you can copy settings from a preset scale (other than
Stretch) or from another user scale.
2–2b: User All Notes Scale
Tune [–99…+99]
Makes independent pitch settings for each of the 128
notes.
Adjust the pitch of each of the 128 notes (C–1 – G9) in
one-cent steps. This adjustment is relative to equal
temperament.
A setting of
–99
lowers the pitch approximately a
semitone below normal pitch.
A setting of
+99
raises the pitch approximately a
semitone above normal pitch.
Use the horizontal scroll bar to move to the key range
that you want to set, and select the key that you want
to specify.
Note: The note can also be selected by holding down
the ENTER switch and playing a note on the keyboard.
By executing the page menu command “Copy Scale,”
you can copy settings from a preset scale (including
Stretch) or another user scale.
▼
2–2: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.
• 0:
Write Global Setting
. For more information, see
“Write Global Setting” on page 682.
• 1:
Copy Scale
. For more information, see “Copy
Scale” on page 688.