background image

PRECAUTIONS

•  Store the Tornado V5 e-cigarette and its accessories 

away from children whilst not in use.

•  Please only use the charging cable provided.

•  Please dispose of dead batteries in accordance  

with your country’s appropriate legislation.

•  Do not charge the battery in a damp environment,  

in temperatures under 0°C or above 45°C.

•  Do not carry batteries in a pocket or bag with other 

metallic objects.

WARRANTY   

The Tornado V5 components contained in each kit 

have a 28-day parts warranty with the exception 

of the atomizer heads which are covered by our 

Dead On Arrival warranty only. The USB cable 

supplied has a 12-month warranty. If any parts are 

found to be faulty within this time please contact 

our customer service team, and we will arrange 

for a replacement. We may require the goods to be 

returned for further investigation.

USER GUIDE

Manufactured in China under the authority 

of Pillbox38 UK Ltd,  Stancliffe Street, 

Blackburn,  Lancashire, BB2 2QR.

UK: Tel 01254 692244   www.totallywicked-eliquid.co.uk 

USA: Tel 1(888) 761-9425   www.totallywicked-eliquid.com 

GER: Tel 01803 942533   www.totallywicked-eliquid.de

Filling the V5 BDC:
•  Holding the tank vertical with the base 

(A) uppermost unscrew the base from 

the tank (C). 

•  Fill the tank up to but not beyond the 

level of the internal tube as shown in (D).

•  Refit the base (A) to the tank (C) and 

tighten finger tight only.

•  Invert the tank and set aside for 5 

minutes to allow the e-liquid to fully soak 

the atomizer head before use.

•  Attach the V5 BDC Tank to the battery.

Using the Tornado V5:
Holding the mouthpiece to your mouth, 

press the power button on the battery 

and gently inhale on the device for 2 to 5 

seconds while keeping the power button 

depressed. Release the power when you 

stop inhaling.

Replacing the Tornado V5 atomizer head:
•  Remove the V5 BDC tank from the 

battery.

•  Holding the V5 BDC tank vertical with the 

base uppermost, unscrew the base (A) 

from the tank (C).

•  The atomizer heads are a push fit. 

Remove the old atomizer head (B) by 

pulling it away from the base (A).

•  Insert a new atomizer head and push it 

firmly into the base (A).

•  Refill the tank if necessary and refit the 

base (A) to the tank (C).  

Allow 5 minutes to allow the e-liquid to 

fully soak the atomizer head before use.

•  Attach the V5 BDC Tank to the battery.

PLEASE NOTE: The V5 mouthpiece is not 

removable.

A

B

C

D

Battery Operation:
To turn the battery on or off click the power button 5 times within 2 seconds.
The Tornado battery has 2 modes of operation, regulated and unregulated power output.
Regulated output produces a constant output of 3.7V from fully charged to discharged.
Unregulated output produces a higher output of 4.2V which diminishes to 3.3V over the 

period of discharge.
To toggle between the 2 modes, turn the battery off by clicking the power button 5 

times, once off hold the power button for approximately 5 seconds, the power button 

will flash white for regulated mode and orange for unregulated mode, press the power 

button 5 times to turn the battery back on in the mode selected.

Charging:
To charge the battery, connect the supplied USB cable to a suitable power source such 

as a computer or USB power adapter.  The power button will light red until charging is 

complete when the light will go out to indicate charging is complete.

Battery charge remaining:
The power button LED will show white if the charge remaining is 60% or more, the LED 

will change to pale blue when below 60% charged.  The LED will turn to dark blue when 

there is 10% or less remaining charge. When fully discharged the LED will flash 20 

times and shut down, the battery will require charging before further use.  

The Tornado V5 can be used normally whilst being charged.

Power

button

USB Port

Regulated mode

Unregulated mode

100% to 60% charged

60% to 10% charged

Less than 10% charged

Отзывы: