Protection management system
61
Figure 8. Configuring an update task from another profile
6.7.
Configuring Scheduled Tasks
and Notifications
Scheduling configuration is the same for virus scan tasks, application updates,
and Kaspersky Anti-Virus runtime messages.
By default, the virus scan tasks created at application install are disabled. The
only exception is a scan of startup objects which is run every time Kaspersky
Anti-Virus is started. Updates are configured to occur automatically by default as
updates become available on Kaspersky Lab update servers.
In the event that you are not satisfied with these settings, you may reconfigure
the scheduling.
The primary value to define is the frequency of an event (task execution or notifi-
cation). Select the desired option under
Frequency
(see Figure 9). Then, update
settings for the selected option must be specified under
Update Settings
. The
following selection is available:
At a specified time
. Run task or send notification on the specified date and
at the specified time.
At application startup
. Run task or send notification every time Kaspersky
Anti-Virus is started. A time delay to run the task after the application is
started may also be specified .
After each update
. Task is run after each application database update (this
option only applies to virus scan tasks).
Minutely
. Time interval between task runs or notifications is several minutes.
Set time interval in minutes under schedule settings. It should not exceed 59
minutes.
Hours
. Interval between task runs and notifications is several hours. If this
option is selected, specify the time interval under schedule settings:
Every N
hours
and set
N
.
For hourly runs, for example, specify
Every 1 hours.