
Installing Kaspersky Anti-Virus 7.0
31
Step 9. Finishing Program Installation
In this stage, the program will ask you to finish installing the program on your
computer.
We do not recommend deselecting the
Enable Self-Defense before installa-
tion
when initially installing Kaspersky Internet Security. By enabling the protec-
tion modules, you can correctly roll back installation if errors occur while installing
the program. If you are reinstalling the program, we recommend that you dese-
lect this checkbox.
If the application is installed remotely via
Windows Remote Desktop
, we rec-
ommend unchecking the flag
Enable Self-Defense before installation
.
Otherwise the installation procedure might not complete or complete correctly.
To continue installation, click the
Next
button.
Caution!
Current network connections are dropped during an install involving Kaspersky
Anti-Virus components which intercept network traffic. Most dropped connections
are re-established after a period of time.
Step 10. Completing the installation procedure
The
Complete Installation
window contains information on finishing the Kas-
persky Anti-Virus installation process.
If installation is completed successfully, a message on the screen will advise you
to restart your computer. After restarting your system, the Kaspersky Anti-Virus
Setup Wizard will automatically launch.
If there is no need for restarting your system to complete the installation, click
Next
to go on to the Setup Wizard.
3.2.
Setup Wizard
The Kaspersky Anti-Virus 7.0 Setup Wizard starts once the program has finished
installation. It is designed to help you configure the initial program settings to
conform to the features and uses of your computer.
The Setup Wizard interface is designed like a standard Microsoft Windows W i-
zard and consists of a series of steps that you can move between using the
Back
and
Next
buttons, or complete using the
Finish
button. The
Cancel
button
will stop the Wizard at any point.