
Working with the program from the command line
197
or task.
STATUS
- display the current status of the real-time
protection component or task.
STATISTICS
– outputs statistics to the screen on real-
time protection component or task operation.
Note that you cannot execute the commands
PAUSE
and
STOP
without entering the password.
<profile|task_name>
You can specify any real-time protection component,
modules in the components, on-demand scan tasks, or
updates for the values of <profile> (the standard val-
ues used in the program are shown in the table be-
low).
You can specify the name of any on-demand scan or
update task as the value for <task_name>.
<your_password>
Kaspersky Anti-Virus password assigned in the pro-
gram interface.
/R[A]:<report_file>
R:<report_file>
– only log important events in the
report.
/RA:<report_file>
– log all events in the report..
You can use an absolute or relative path to the file. If
the parameter is not defined, the scan results are dis-
played on screen, and all events are displayed.
One of the following values is assigned to
<profile>
:
RTP
All protection components
The command avp.com START RTP starts all real-
time protection components if protection is fully
disabled (see 6.1.2 on pg. 56) or paused (see 6.1.1
on pg. 55). This command will also start any real-
time protection component that was paused that
was paused from the GUI or the PAUSE command
from the command prompt.
If the component was disabled from the GUI or the
STOP command from the command prompt, the
command avp.com START RTP will not start it. In
order to start it, you must execute the command