166
Kaspersky Anti-Virus 7.0
process all the objects on the list). After each object is processed, a message will
appear on screen. Here you will have to decide what to do with them next.
If you check
Apply to all
in the notification window, the action selected will be
applied to all objects with the status selected from the list before beginning
processing.
15.3.1.
Configuring report settings
To configure settings for creating and saving reports:
1. Open the application settings window and select
Reports and data
files
.
2. Edit the settings under
Reports
(see Figure 61) as follows:
Allow or disable logging informative events. These events are gen-
erally not important for security. To log events, check
Log non-
critical events
;
Choose only to report events that have occurred since the last time
the task was run. This saves disk space by reducing the report size.
If
Keep only recent events
is checked, the report will begin
from scratch every time you restart the task. However, only non-
critical information will be overwritten.
Set the storage time for reports. By default, the report storage time
is 30 days, at the end of which the reports are deleted. You can
change the maximum storage time or remove this restriction alto-
gether.
Figure 61. Configuring report settings
15.3.2.
The
Detected
tab
This tab (see Figure 62) contains a list of dangerous objects detected by Kas-
persky Anti-Virus. The full filename and path is shown for each object, with the
status assigned to it by the program when it was scanned or processed.