Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 615 / 652

show fabric administration inventory director-group status
Supported Platforms QFabric System
Syntax show fabric administration inventory director-group status (target director-device-name |
all)
Release Information Command introduced in Junos OS Release 11.3 for the QFX Series.
Description (QFabric systems only) Display the status of Director devices that belong to a QFabric
system Director group.
Options none —Display the status of all Director devices within a QFabric system.
all
—Display the status of all Director devices within a QFabric system.
target director-device-name —Display the status of a specific Director device within a
QFabric system.
Required Privilege
Level
admin
Related
Documentation
request fabric administration director-group change-master on page 486
•
•
Performing the QFabric System Initial Setup on a QFX3100 Director Group on page 362
•
Understanding the Director Group on page 18
List of Sample Output show fabric administration inventory director-group status on page 590
show fabric administration inventory director-group status target on page 592
Output Fields Table 100 on page 589 lists the output fields for the
show fabric administration inventory
director-group status
command. Output fields are listed in the approximate order in which
they appear.
Table 100: show fabric administration inventory director-group status Output Fields
Field Description Field Name
Timestamp for the Director group status report. Director Group Status
Name of the Director device. Member
Current operational mode of the Director device: online or offline . Status
High availability operational role of the Director device:
master
or
standby
. Role
Management IP address of the Director device. Mgmt Address
Percentage of CPU processing memory being used by the Director device. CPU
Available storage memory on the Director device. Free Memory
589 Copyright © 2015, Juniper Networks, Inc.
Chapter 21: Operational Mode Commands