Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 422 / 652

NOTE: The following rules apply to QFabric Node group naming:
•
Node group names must use alphabetic (A through Z and a through z),
numeric (0 through 9), or dash (-) characters.
• The maximum length of a Node group name is 30 characters.
•
Node group names are case sensitive. For example, MY-NG-1 and my-ng-1
refer to different components.
• You cannot use the reserved names all , fabric , or director-group as a Node
group name.
NOTE: If you attempt to commit all configuration settings for a new Node
group (such as the Node group itself, aliasing, and other features) at the
same time, the commit operation might appear to succeed when it actually
has failed. For this reason, we recommend configuring and verifying Node
groups and aliases first, followed by configuring and verifying other features.
Establishing the Node groups and aliases first enables the QFabric system
to reject any potentially unsupported configuration. The resulting commit
errors indicate where the configuration problem lies. To verify the
establishment of Node groups and aliases before configuring other features,
issue the
show fabric administration inventory command.
To display an automatically generated server Node group:
• Issue the show fabric administration inventory node-groups command and look for
Node groups containing a single Node device that has the same name or serial number
as the server Node group.
root@qfabric>
show fabric administration inventory node-groups
Item Identifier Connection Configuration
Node group
BBAK8281 Connected Configured
BBAK8281 Connected
BBAK8835 Connected Configured
BBAK8835 Connected
NW-NG-0 Connected Configured
Node0 BBAK8309 Connected
Node1 BBAK8283 Connected
S1 Connected Configured
Node2 BBAK8891 Connected
Node3 BBAK8868 Connected
Copyright © 2015, Juniper Networks, Inc. 396
QFX3000-G QFabric System Deployment Guide