Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 156 / 652

Table 41: AC Power Specifications for a QFX3100 Director Device (continued)
Specifications Item
• 5 A at 100 VAC
• 2 A at 240 VAC
AC input current rating
220 Typical power consumption
476 Maximum power consumption
Related
Documentation
AC Power Supply in a QFX3100 Director Device
•
•
AC Power Cord Specifications for a QFX3100 Director Device on page 130
AC Power Cord Specifications for a QFX3100 Director Device
Supported Platforms
QFabric System
Detachable AC power cords are supplied with the QFX3100 Director device. The coupler
is type C13 as described by International Electrotechnical Commission (IEC) standard
60320. The plug at the male end of the power cord fits into the power source outlet that
is standard for your geographical location.
CAUTION: The supplied AC power cord for the switches is intended for use
with the QFX3100 Director device only and not for any other use.
NOTE: In North America, AC power cords must not exceed 4.5 meters
(approximately 14.75 feet) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section 4-010(3). The cords supplied with the QFX3100 Director
device are in compliance.
Table 42 on page 130 lists AC power cord specifications provided for each country or
region.
Table 42: AC Power Cord Specifications for a QFX3100 Director Device
Plug Standards Electrical Specifications Country or Region
AS/NZ 3112-1993 250 VAC, 10 A, 50 Hz Australia
GB2099.1 1996 and GB1002 1996
(CH1-10P) 250 VAC, 10 A, 50 Hz China
CEE (7) VII 250 VAC, 10 A, 50 Hz Europe (except Italy, Switzerland,
and United Kingdom)
Copyright © 2015, Juniper Networks, Inc. 130
QFX3000-G QFabric System Deployment Guide