Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 423 / 652

To create a network Node group:
1.
Specify the Node devices you wish to add to the network Node group by including the
node-device
statement at the
[edit fabric resources node-group NW-NG-0]
hierarchy
level.
NOTE:
•
The network Node group must use the predefined name NW-NG-0. You
must use this name when adding Node devices to the network Node
group. You cannot specify a different name. Also, you can configure only
one network Node group per partition.
•
When you configure routing protocols on the QFabric system, you must
use interfaces from the Node devices assigned to the network Node
group. If you try to configure routing protocols on interfaces from the
Node devices assigned to server Node groups, the configuration commit
operation fails.
[edit]
root@qfabric# set fabric resources node-group NW-NG-0 node-device Node0
root@qfabric# set fabric resources node-group NW-NG-0 node-device Node1
2.
To designate the Node group as a network Node group, include the
network-domain
statement at the
[edit fabric resources node-group NW-NG-0]
hierarchy level.
[edit]
root@qfabric# set fabric resources node-group NW-NG-0 network-domain
3.
Review your configuration and issue the commit command.
[edit]
root@qfabric# show fabric
resources {
node-group NW-NG-0 {
network-domain;
node-device Node0;
node-device Node1;
}
}
[edit]
root@qfabric#
commit
commit complete
NOTE: When you add or delete Node devices from a Node group
configuration, the corresponding Node devices reboot when you commit
the configuration change.
4.
To determine if your network Node group is operational, issue the show fabric
administration inventory node-groups command in operational mode.
root@qfabric> show fabric administration inventory node-groups NW-NG-0
Item Identifier Connection Configuration
Node group
397 Copyright © 2015, Juniper Networks, Inc.
Chapter 17: QFabric System Configuration