Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 230 / 652

Power Cord Specifications for a QFX3500, QFX3600, or QFX3600-I Device”
on page 139
).
•
Install the power supply in the chassis. For instructions on installing a power supply in
a QFX3500 device, see
Installing a Power Supply in a QFX3500 Device . For instructions
on installing a power supply in a QFX3600 or QFX3600-I device, see Installing a Power
Supply in a QFX3600 or QFX3600-I Device .
NOTE: Each power supply must be connected to a dedicated power source
outlet.
To connect AC power to a QFX3500, QFX3600, or QFX3600-I device:
1.
Attach the grounding strap to your bare wrist and to a site ESD point.
2.
Ensure that the power supplies are fully inserted in the chassis and the latches are
secure. If only one power supply is installed, ensure a that blank cover panel is installed
over the second power supply slot.
3.
Locate the power cord or cords shipped with the device; the cords have plugs
appropriate for your geographical location. See
“AC Power Cord Specifications for a
QFX3500, QFX3600, or QFX3600-I Device” on page 139 .
WARNING: Ensure that the power cord does not block access to device
components or drape where people can trip on it.
4.
Connect each power supply to the power sources. Insert the coupler end of the power
cord into the AC power cord inlet on the AC power supply faceplate.
5.
Push the power cord retainer onto the power cord (see Figure 44 on page 204 or
Figure 45 on page 205 ).
Figure 44: Connecting an AC Power Cord to an AC Power Supply in a
QFX3500 Device
AC
DC
!
g050009
Cord retainer
Copyright © 2015, Juniper Networks, Inc. 204
QFX3000-G QFabric System Deployment Guide