Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 426 / 652

Step-by-Step
Procedure
The following example requires that you navigate various levels in the configuration
hierarchy. For instructions on how to do that, see
Using the CLI Editor in Configuration
Mode in the CLI User Guide .
To configure SNMP on the QFabric system:
NOTE: If the name, description, location, contact, or community name
contains spaces, enclose the text in quotation marks (" ").
1.
Configure the SNMP system name:
[edit snmp]
user@switch#
set name “snmp qfabric”
2.
Specify a description.
[edit snmp]
user@switch#
set description “qfabric0 system”
This string is placed into the MIB II sysDescription object.
3.
Specify the physical location of the QFabric system.
[edit snmp]
user@switch#
set location “Lab 4 Row 11”
This string is placed into the MIB II sysLocation object.
4.
Specify an administrative contact for the SNMP system.
[edit snmp]
user@switch#
set contact “qfabric-admin@qfabric0”
This name is placed into the MIB II sysContact object.
5.
Specify a unique SNMP community name and the read-only authorization level.
NOTE: The
read-write
option is not supported on the QFabric system.
[edit snmp]
user@switch#
set community public authorization read-only
6.
Create a client list with a set of IP addresses that can use the SNMP community.
[edit snmp]
user@switch#
set client-list list0 192.168.0.0/24
user@switch# set community public client-list-name list0
7.
Specify IP addresses of clients that are restricted from using the community.
[edit snmp]
user@switch#
set community public clients 192.170.0.0/24 restrict
8.
Configure a trap group, destination port, and a target to receive the SNMP traps in
the trap group.
Copyright © 2015, Juniper Networks, Inc. 400
QFX3000-G QFabric System Deployment Guide