Juniper QFX3000-G QFabric, Руководство по развертыванию, Страница: 418 / 652

Related
Documentation
aliases on page 416
•
•
show fabric administration inventory on page 584
•
show fabric administration inventory director-group status on page 589
•
show fabric administration inventory interconnect-devices on page 597
•
show fabric administration inventory node-devices on page 599
•
Understanding the Director Group on page 18
•
Understanding Interconnect Devices on page 21
•
Understanding Node Devices on page 24
Configuring the Port Type on QFX3600 Node Devices
Supported Platforms
QFabric System
,
QFX3600
The QFX3600 Node device provides 16 40-Gbps QSFP+ ports. By default, four ports
(labeled
Q0 through Q3 ) operate as 40-gigabit data plane ( fte ) uplink ports for uplink
connections between your Node device and your Interconnect devices. Twelve ports
(labeled
Q4 through Q15 ) operate as 10-Gigabit Ethernet ( xe ) ports to support 48
10-Gigabit Ethernet interfaces for connections to either endpoint systems or external
networks. Optionally, you can choose to configure ports Q0 through Q7 to operate as
40-gigabit data plane uplink ports, and ports Q2 through Q15 to operate as 10-Gigabit
Ethernet ports.
NOTE: You can use QSFP+ to four SFP+ breakout cables or QSFP+
transceivers with fiber breakout cables to connect the 10-Gigabit Ethernet
ports to other devices.
NOTE: When you delete the port type configuration for an individual port or
a block of ports, the ports return to operating in their default port type.
This topic explains how to configure the port type on QFX3600 Node devices.
Before you configure the port type on QFX3600 Node devices:
• Make sure your QFabric system is operational.
• Issue the show fabric administration inventory node-groups command to display the
existing Node groups and the Node devices in each Node group.
Copyright © 2015, Juniper Networks, Inc. 392
QFX3000-G QFabric System Deployment Guide